CM8200-24MT: 14DI10DO-2AI-2AO
CM8200-20MT: 10DI10DO-6AI-2AO
this standard PLC coated with imported insulating paint, can proof, anti-static, anti-short circuit, corrosion, with high resistance to interference.
The PLC is the latest development of high-performance, low-cost imitation Mitsubishi PLC, equivalent to Mitsubishi FX2N, PLC internal resources and Mitsubishi FX2N exactly the same.
The PLC has superior anti-interference ability and expand capacity, expandable to 512 points, reaching the level of medium-sized PLC, extension module is adaptive expansion module, without coding selection, automatic identification, this hot-swappable Serial PLC absolutely no damage to the protective measures of the PLC have been greatly enhanced, King can be assured.
& Nbsp; the power supply is DC24V.
Transistor using new MOSFET, can withstand the current of 1A / 100V.
1, supports high-speed pulse output axis 200K;
2, supports four groups AB phase encoder input;
3, supports three communication ports, one RS232,2 a RS485
4, supports all FX1N instructions, including external interrupt, timer interrupt and other senior command;
5, you can plug terminals, elegant appearance;
6, Mitsubishi software support and the latest software FXGP_WIN_C GX8.52, GX8.86, GX-Works2 such as the latest software, you can download online monitoring, surveillance, etc. written all functions.
Two, CM8000 series of new sporty programmable controllers [PLC] high-speed input-output description & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp ; & nbsp;
1, high-speed input / hardware counter input / external interrupt input instructions
| port number |
High-speed counter |
external interrupt number |
Notes |
| interrupt number |
interrupt control ON prohibition |
| rising edge |
falling |
| X0 |
C235 10K |
C251-A 10K |
I001 |
I000 |
M8050 |
Support SPD HSCS HSCR directive |
| X1 |
C236 10K |
C251-B 10K |
I101 |
I100 |
M8051 |
| X2 |
C237 200K |
|
I201 |
I200 |
M8052 |
| X3 |
C238 200K |
|
I301 |
I300 |
M8053 |
| X4 |
C239 10K |
|
I401 |
I400 |
M8054 |
| X5 |
C240 10K |
|
I501 |
I500 |
M8055 |
| X6 |
|
C252-A 10K |
|
| X7 |
|
C252-B 10K |
|
| X10 |
|
C253-A 200K |
|
M8198 4 octave |
| X11 |
|
C253-B 200K |
|
| X12 |
|
C254-A 200K |
|
M8199 4 octave |
| X13 |
|
C254-B 200K |
|
2, high-speed pulse output / fat width modulated output instructions
| port number |
High-speed pulse output |
PWM outputs |
Note |
| corresponding |
pulses |
output |
Stop |
| Y0 |
Pulse output 1 |
D8140 |
M8147 |
M8145 |
PWM1 |
M8197 ON0.1mS M8197 OFF1mS |
total frequency does not exceed 400K, single-axis maximum 200K |
| Y1 |
Pulse output 2 |
D8142 |
M8148 |
M8146 |
PWM2 |
| Y2 |
Pulse output 3 |
D8150 |
M8149 |
M8144 |
PWM3 |
| Y3 |
Pulse output 4 |
D8152 |
M8150 |
M8143 |
PWM4 |
| D8145: positioning command base rate |
| D8146: maximum speed, the default 100Khz |
| D8148: deceleration time, default 100ms |
| Full support: PLSY, PLSV, PLSR, PWM, DRVI, DRVA, ZRN instruction Note: PLSY operation can change the frequency of |
Note: X0 + X1 + X2 + X3 + X4 + X5 + X6 + X7 + Y0 + Y1 + Y2 + Y3 total frequency should not exceed 400K 3, timer interrupt instructions
| interrupt input number |
interrupt cycle (ms) |
ON ban flag when the interrupt disable |
| I6 □□ |
□□ pointer name, enter an integer of 10-99. For example I610=per 10MS timer interrupt. Pointer number (I6, I7, I8) can not be reused. |
M8056 |
| I7 □□ |
M8057 |
| I8 □□ |
D8058 |
| every specified interrupt the cycle time (10ms-99ms), execute the interrupt subroutine |
4, analog input [AI] Description
| port number |
register address |
voltage / current |
precision 12 |
Notes |
| AV0 |
D8030 |
0-10V |
0-4095 |
|
| AI0 |
0-20mA |
| AV1 |
D8031 |
0-10V |
0-4095 |
| AI1 |
0-20mA |
| AV2 |
D8032 |
0-10V |
0-4095 |
| AI2 |
0-20mA |
| AV3 |
D8033 |
0-10V |
0-4095 |
| AI3 |
0-20mA |
| AV4 |
D8034 |
0-10V |
0-4095 |
| AI4 |
0-20mA |
| AV5 |
D8035 |
0-10V |
0-4095 |
| AI5 |
0-20mA |
| D8038: software filter coefficients can be set to default to 10 range 0-200 |
5, analog output [A0] Description
| port number |
register address |
voltage / current |
precision 12 |
Notes |
| DV0 |
D8114 |
0-10V |
0-4095 |
|
| DI0 |
0-20mA |
| DV1 |
D8115 |
0-10V |
0-4095 |
| DI1 |
0-20mA |
| analog output does not support current output |
three, CM8000 new sporty programmable controllers Selection Help
| Specifications Model |
Input / Output Specifications |
communication port (optional) |
|
| Dimensions mm |
input unit |
output unit |
|
|
| DI |
speed |
AB phase |
AI |
DO |
speed |
form |
AO |
|
| CM8100-40MT DC24V Power |
188 * 100 |
24 |
12 axis |
4-axis |
4-channel 0-4095 0-10V 0-20MA D8030- D8033 |
16 |
4-axis |
Transistors 500mA / DC24V |
2 channel 0-4095 0-10V D8114- D8115 |
COM1: RS232 COM2: RS485 COM3: RS485 |
|
|
CM8200-24MT
AC220V or DC24V power supply |
120 * 96 * 63 |
14 |
12 axis |
4-axis |
2 channel 0-4095 0-10V 0-20MA D8030- D8033 |
10 |
4-axis |
Transistors 500mA / DC24V |
2 channel 0-4095 0-10V D8114- D8115 |
COM1: RS232 COM2: RS485 COM3: RS485 |
|
|
CM8200-20MT
AC220V or DC24V power supply |
120 * 96 * 63 |
10 |
10 axis |
4-axis |
6 channel 0-4095 0-10V 0-20MA D8030- D8033 |
10 |
4-axis |
Transistors 500mA / DC24V |
2 channel 0-4095 0-10V D8114- D8115 |
COM1: RS232 COM2: RS485 COM3: RS485 |
|
|
CM8000-0808EX
MT / MR
DC24V Power |
70 * 96 * 63 |
8 |
|
|
|
8 |
|
Transistors 500mA / DC24V relay 1A / 250V |
|
|
|
Note: CM8200 Series PLC switch which can be expanded to 256 points, expandable to 66 analog inputs outputs 22 points.
The PC board has the following features:
can be connected with a number of human-machine interface, such as Delta, Eview other applications that are equivalent to the Mitsubishi FX1N.
PC parallel operation with other manufacturers.
With Mitsubishi ladder language application that supports Mitsubishi FXGP_WIN_C software and the latest software GX8.52, can be downloaded online online monitoring.
& Nbsp;
& nbsp;
The PC can be extended, can be extended to a maximum 256 points in the system.
Support ladder programming, downloading, monitoring, encrypted passwords for PC product settings.
COM1 for download on the program and the man-machine communications interface port, optional COM2 (RS485) and COM3 (RS485).
Bare board equipment for low-end PC and a standard PC for high-end devices to choose from, the better price.
The PC uses the world's most advanced ARM microprocessor cores to do the main control chip, ultra-fast operation speed, speed equal to FX3U.
Unique encryption, so your program better confidentiality.
By industrial field test, interference and reliability reached the optimum level. The PC
year warranty (except artificial damage and abnormal voltage and other factors), courier fees to pay half.
